Metadata-Version: 1.1
Name: bwameth
Version: 0.2.0
Summary: align BS-Seq reads with bwa mem
Home-page: UNKNOWN
Author: Brent Pedersen
Author-email: bpederse@gmail.com
License: MIT
Description: bwa-meth
        ========
        
        Fast and accurante alignment of BS-Seq reads.
        
        ## NOTE!!!
        
        As of 2016-08-18, bwa-meth now outputs sam to stdout. It is up to the user to
        convert to bam. This means that the --prefix and --calmd flags are gone.
        
        ## Update 2016
        
        `bwa-meth` is still among (if not *the*) best aligners for BS-Seq.
        While it is fairly stable, I will continue to support the alignment
        part of `bwa-meth`--fixing any bugs or updating as needed.
        
        There are now several (likely better) alternatives for tabulation
        and SNP calling than provided here so I will not develop those further.
        
        For tabulation, bias, and plotting, use [MethylDackel](https://github.com/dpryan79/methyldackel)
        
        For SNP calling (a more modern BisSNP), use [biscuit](https://github.com/zwdzwd/biscuit)
        
        
        ## Intro
        
        This works for single-end reads and for **paired-end reads from the
        directional protocol** (most common).
        
        Uses the method employed by methylcoder and Bismark of *in silico*
        conversion of all C's to T's in both reference and reads.
        
        Recovers the original read (needed to tabulate methylation) by attaching it
        as a comment which **bwa** appends as a tag to the read.
        
        Performs favorably to existing aligners gauged by number of on and off-target reads for a capture method that targets CpG-rich region. Some off-target regions may be enriched, but all aligners are be subject to the same assumptions.
        See manuscript: http://arxiv.org/abs/1401.1129 for details.
        Optimal alignment is the upper-left corner. Curves are drawn by varying the
        mapping quality cutoff for alingers that use it.
        
        This image is on real reads and represents an attempt to find good parameters
        for all aligners tested.
        
        ![Untrimmed reads comparison](https://gist.githubusercontent.com/brentp/bf7d3c3d3f23cc319ed8/raw/d5f1ebcc53b924a05a5980159bfcb97494ec34f2/real.gif)
        
        Note that *bwa-meth* and *Last* perform well without trimming.
        
        run.sh scripts for each method are here: https://github.com/brentp/bwa-meth/tree/master/compare
        I have done my best to have each method perform optimally, but no doubt there
        could be improvements.
        
        QuickStart
        ==========
        
        Without installation, you can use as `python bwameth.py` with install, the
        command is `bwameth.py`.
        
        The commands:
        
            bwameth.py index $REF
            bwameth.py --reference $REF some_R1.fastq.gz some_R2.fastq.gz > some.output.sam
        
        will create `some.output.bam` and `some.output.bam.bai`.
        To align single end-reads, specify only 1 file.
        
        See the **full example** at: https://github.com/brentp/bwa-meth/tree/master/example/
        
        Installation
        ============
        
        The following snippet should work for most systems that have samtools and bwa
        installed and the ability to install python packages. (Or, you can send this
        to your sys-admin). See the dependencies section below for further instructions: 
        
        ```Shell
        
            # these 4 lines are only needed if you don't have toolshed installed
            wget https://pypi.python.org/packages/source/t/toolshed/toolshed-0.4.0.tar.gz
            tar xzvf toolshed-0.4.0.tar.gz
            cd toolshed-0.4.0
            sudo python setup.py install
        
            wget https://github.com/brentp/bwa-meth/archive/master.zip
            unzip master.zip
            cd bwa-meth-master/
            sudo python setup.py install
        
        ```
        
        After this, you should be able to run: `bwameth.py` and see the help.
        
        Dependencies
        ------------
        
        `bwa-meth` depends on 
        
         + python 2.7+ (including python3)
           - `toolshed` library. can be installed with: 
              * `easy_install toolshed` or
              * `pip install toolshed`
        
           - if you don't have root or sudo priviledges, you can run
             `python setup.py install --user` from this directory and the bwameth.py
             executable will be at: ~/.local/bin/bwameth.py
        
           - if you do have root or sudo run: `[sudo] python setup.py install` from
             this directory
        
           - users unaccustomed to installing their own python packages should 
             download anaconda: https://store.continuum.io/cshop/anaconda/ and
             then install the toolshed module with pip as described above.
        
         + samtools command on the `$PATH` (https://github.com/samtools/samtools)
        
         + bwa mem from: https://github.com/lh3/bwa
        
        
        usage
        =====
        
        Index
        -----
        
        One time only, you need to index a reference sequence.
        
            bwameth.py index $REFERENCE
        
        If your reference is `some.fasta`, this will create `some.c2t.fasta`
        and all of the bwa indexes associated with it.
        
        Align
        -----
        
            bwameth.py --threads 16 \
                 --reference $REFERENCE \
                 $FQ1 $FQ2 > some.sam
                 
        The output will pass will have the reads in the correct location (flipped from G => A reference).
        
        Handles clipped alignments and indels correctly. Fastqs can be gzipped
        or not.
        
        The command above will be sent to BWA to do the work as something like:
        
            bwa mem -L 25 -pCM -t 15  $REFERENCE.c2t.fa \
                    '<python bwameth.py c2t $FQ1 $FQ2'
        
        So the converted reads are streamed directly to bwa and **never written
        to disk**. The output from that is modified by `bwa-meth` and streamed
        straight to a bam file.
        
Platform: UNKNOWN
Classifier: Topic :: Scientific/Engineering :: Bio-Informatics
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 3
